• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Problems and Solutions

Cars are expensive possessions that we save years for. It can be very upsetting when your joy and pride is taken away.

However, if you've had the ghost immobiliser installed by a recognised fitter like Car Theft Solutions, it can stop thieves from driving off with your vehicle in a matter of minutes.

1. No Stop/Start

The Autowatch Ghost CAN Immobiliser was designed and developed as one of the most efficient security systems available. The system works by using the buttons on the steering wheel, the centre console and pedals to enter the pin code into the vehicle's system. This will disable the engine. This stops thieves from stealing your car even having keys or fob.

The Ghost also has high-security options to stop the device being compromised or hacked by thieves. This includes CAN bus blocking as well as cutting the immobiliser. Combining an insurance-approved marking system with cutting a car immobiliser will almost eliminate the possibility of your vehicle being stolen.

This system works in conjunction with the factory-fitted immobiliser of your vehicle to provide an additional layer of security. It prevents the thief even if he's got your key or remote, from opening your vehicle. This protects the value of your resales and keeps your family and you safe.

If your ghost has stopped functioning, it could be an indication of other issues that are not Ghost related. Try entering valet or service modes on your Ghost to test this. This will effectively disconnect your Ghost from the car and you should be able to start the car. If you're unable to do this, there may be a problem with your ghost 2 immobiliser installation near me installation.

It is not recommended to attempt to remove ghosts yourself unless you have the necessary skills. This is because you work with a complex and sensitive system that directly controls your engine. This can cause damage if handled incorrectly and can be extremely dangerous. Therefore, it is recommended to seek assistance from your installer.

2. No ignition

Immobilisers are used in modern cars to prevent the vehicle from starting if your key is not compatible with the one programmed within. The immobiliser checks the transponder codes stored in the immobiliser against the codes that are sent by the key. If the codes are the same then the engine will be able to start. The system could fail due to a variety of reasons, including a lost or missing key or transponder that is damaged or one that isn't coded, or electrical issues like a damaged immobiliser antenna wire that surrounds the ignition cylinder. Multiple keys may also confuse the codes, such as an extra or a vehicle with two transponders on one key.

As a result, when the immobiliser fails to work correctly, it may be difficult to start the vehicle, which would give thieves the impression that it's a faulty system and they can simply leave with your joy and pride. This makes it a crucial investment for any car owner particularly those with high-end vehicles that can be difficult to resell after being stolen or damaged.

The ghost immobiliser is a discrete device that can be hidden almost everywhere in your vehicle and is therefore undetectable to car thieves. It works by using the buttons on your steering wheel, doors or centre console to create a unique PIN code sequence that you are familiar with, ensuring you are the sole person who is able to drive the vehicle. It doesn't have LED indicators and is quiet, so a thief will not even be aware that it exists. The Ghost is TASSA-accredited and approved by Insurance, which means it can be installed by an approved installer. It also protects your joy and security from key cloning and hacking.

3. No engine start

With car theft increasing dramatically in recent years, and keyless entry vehicles being especially susceptible to theft, it's no wonder that many are looking for an additional layer of security. Installing a ghost immobiliser is among the best methods to accomplish this. This innovative device safeguards your vehicle from theft and damage with the help of some of the most advanced technologies on the market today.

Unlike traditional systems that rely on LEDs and key fobs the Ghost is a new generation security system that employs a unique personalised pin code sequence that only you know to allow you to start your vehicle. The device is connected to your vehicle's CAN data network, and then programmed to safeguard it via buttons on the dash and steering wheel. It then stops the engine from running until you enter your pin code first. This is done completely silently and there are no clicks as with other systems, which means that it would be almost impossible for thieves to recognize.

If required it will also turn off the stop/start eco mode. This is done differently on each vehicle but it is typically similar to the system is stalling or locking the gearbox in P. This can be done with or without the activation of the anti-hijack.

Ghost immobilisers guard your vehicle with great effectiveness. They can be used with any key, or even an extra. It can stop all kinds of theft from cars, such as key cloning, hacking, and ECU swapping. It can also prevent damage to your vehicle by detecting vibrations or altering. It can also safeguard your vehicle's resale value by making it less appealing to thieves.

4. No keyless entry

The last thing any car owner would want to go through is having their pride and joy taken away. Whether you've spent years saving for your car or just the owner of a costly vehicle that you're proud to display, having to deal with a vehicle that's stolen is a very depressing experience. With the right security solutions, you can protect against even the most cunning of thieves.

As opposed to wheel locks and Faraday bags, range rover evoque ghost installer 2 immobilisers can be installed discreetly in your vehicle (without damaging your vehicle) and will only allow your car to start when the pin code is entered correctly. This pin code is chosen by you and can be altered multiple times as you'd want. The device is also different on each vehicle so that thieves don't even know that it's there.

Ghost II links up to the CAN system in your vehicle and communicates with it through the CAN data circuit, which means it is not able to be detected by typical thieves' RF scanning or code grabbing technology. It isn't able to be re-enabled by adding a new key or replacing the ECU because only the right pin code will allow your Lexus to start.

Our TASSA certified ghost ii immobiliser 2 immobiliser is insurance approved and will provide you with assurance that your vehicle is protected against theft that is not a contactless process. This will not only assist you to recuperate any losses that could result from theft but will also make it difficult for thieves who might try to attempt to sell your vehicle as they will be aware of its security system that prevents theft. This could save you thousands of dollars in resale.

5. No alarm

A ghost immobiliser fitting near me immobiliser is a advanced device installed inside your vehicle to prevent it from being stolen. It prevents your vehicle from being taken by preventing the engine from starting until you enter a pin-code code that you know.

This is a great anti-theft device because unlike a car alarm or wheel lock ghost immobilisers cannot be cut off, spoofed or jump started. If someone tries to steal your car by using this method, they'll discover that it isn't starting and they'll be forced to turn the vehicle around and leave the scene without it.

Car theft has become more sophisticated, so technology has had to advance to stop thieves from taking your joy and pride. It is crucial to secure your car with a ghost-immobiliser. They are not only affordable however, they also protect your vehicle with great effectiveness.

They're discreet and hardly noticeable therefore a burglar will not be able to spot them. The device can be used with a car tracker, so you'll always know the location of your car and that it's secure.

The Ghost 2 immobiliser cost CAN immobiliser was the first aftermarket CAN bus lock. It was designed to protect against key hacking or cloning and key theft. It's also TASSA-certified, which confirms its reliability. The device is able to be installed inside your vehicle in an obscure location, operates silently, has no radio signals and is not visible to the naked eye. The most appealing aspect is that it costs less than a normal car alarm, and it will be more effective in preventing thieves from taking your car in the first place. This will give you peace of mind, and make your car more secure than it was prior to.