• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to find some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you're planning attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass so that any shards will fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sagging. A sagging Upvc window repair windows can cause problems with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you are happy with the fit of your window, you can tighten screws to secure them in place.

If you cannot reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it can be caused by the handle mechanism wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close your window and do a test fit. The corner joints of the sash must be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the problem the old caulking may need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease it could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier with someone else to assist in holding the frame in place.

It is also worth checking that the upvc window repair hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you advice.

It is also crucial to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause an opening to appear where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may also become unbalanced. It is located on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window repairs near me sill. They can help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is crucial to recognise that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window repairs near me windows, it is always recommended to seek assistance from a professional as soon as you can.