• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why Buy a 10kg Front Loader?

The front loader weighs 10kg and is perfect for large loads of laundry with plenty of space for large wash cycles as well as 13 wash programs including handwash. It's a sophisticated machine with modern features.

Front loaders are generally slower to wash, do not come in larger capacities, and 023456789 (www.023456789.Xyz) are susceptible to mould or mildew. They are more water and energy efficient than top-loaders.

Energy

The primary energy cost in a front loader of 10kg is electricity to heat water to operating temperature, 023456789.xyz, 023456789.xyz, and 023456789.xyz to run the motor. These costs can also be offset by a lower energy consumption when compared with top-loaders. This is due to less power used during the spin cycle and agitation cycle, as well as using less water. Certain machines come with a low-water wash option that makes use of significantly less water than the cotton cycle, thereby saving on both water and energy consumption.

In general, front-load washers use less detergent than top-loaders, and the tumbling action in the drum is able to entrain air to reduce foamy suds and 023456789 spills without lessening cleaning action. The door seals and bellows of top-loaders are more susceptible to wear. The mechanical agitator in a top-loader can also cause significant wear to clothing fabrics. It drags and drops clothes continuously, pushing them against each other. The amount of abrasion is measured by the amount of fabric accumulating in a clothes dryer's lint filter because the majority of lint is made up of fragments of fibers that are ripped from clothes during drying and washing. To minimize this, a lot of top-loaders are designed to run at a slower pace and may also have a "freshening" cycle to clean the mechanical gears and bellows.

Water

Top-loading washers require an impeller or an agitator to force water and soap through the clothing, causing mechanical wear and www.023456789.Xyz abrasion. By contrast, front-loaders use paddles that gently lift and drop clothing inside a spinning drum for cleaning, reducing such wear. The amount of lint that is in the dryer lint filters can be used to estimate the rate of wear. Lint is largely made up of stray threads which are removed from clothes when drying and washing.

Because front-load machines require less water than top-loaders and are therefore less susceptible to leakage. True front-loaders will require a bellows seal or seal to keep water from getting out of the door during operation, however they do not typically need to be maintained as regularly as their counterparts on top-loaders.

Furthermore, front-loaders can work with cold water or hot and a majority of them without any external heating source, which makes them more energy efficient than most top-loaders. This efficiency could reduce operating costs for the same laundry load, especially in locations where energy, water and detergents are expensive.