• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors are worn out over time and will need to be replaced. When replacing them, it is crucial that the new handles are in line with the critical dimensions of the handle that was previously used.

The top screw position as well as the lever and keyhole sizes are the three measurements you have to determine. Use the size guide to assistance with this.

Inline Lever/Lever

A lever/lever handle is a modern-day door handle designed to work with new or replacement doors. This type of handle is available in a variety of styles and finishes. A variety of manufacturers provide this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite handles are made from robust materials, and are ideal for multi-point lock doors that require a strong design. The handles are inline and use the same spindle and screws to secure them. They can be easily installed on any uPVC/Composite door.

The handle can be placed and angled to suit any user. The handle has been tested to 200,000 cycles, this allows for the assurance of the quality of the finish as well as the performance of the handle over time. The sprung lever can be shortened to fit a wider range of locks. This is particularly beneficial in doors with smaller door frames where the cylinder is further back. A lever that is shorter can be used on doors that have a latch that can be opened by the thumb located on the inside.

Lever Pad

The lever pad upvc handle differs from the lever handles that are used on the majority of doors. These handle types can either operate from a single spindle (inline) or independently from both sides using two inline or offset spindles (pad). They are typically used on UPVC double glazed doors. They are available in a variety of variations and finishes.

The handles are available in a variety of finishes including White chrome and Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high degree of durability and performance for the intended use.

All UPVC levers for window handles for wooden windows include a spindle and screws, and can be fitted on the uPVC door. The 211mm backplate fixing centres allow for a wider size of handle which is often a benefit when replacing a damaged or worn multi-point patio door handle lock mechanism. The levers for these handles have springs, which eliminate the problem of door handles that move out of horizontal position when not being used.

It is crucial to match up the dimensions of the PZ for both the multipoint lock and the uPVC doors when selecting a replacement handles for upvc windows UPVC spindle and handle. This measurement may also be called 'handle centres or cylinder centres'. It is important for matching the correct handles.

Once you have the proper PZ size you will then need to ensure that the lever pads and push pads are of a appropriate shape to accommodate the American with Disabilities Act (ADA) compatible handles you require for your doors. They typically have of a round or square shape, with an internal lever and an external push pad.

The majority of UPVC Lever Pads that we sell are sprung. This means they will return to a horizontal state when not being used, rather than hanging and possibly being stuck in the frame. This prevents drafts and cold air from entering a home. The majority of UPVC lever pad style handles are available in left and right handed models which allows them to be placed on either side of doors.

Euro Cylinder

Cylinder locks are usually used on uPVC doors, but they can also be found on other types of window handles of doors. They work by using a key to unlock a cylinder that will reveal pins that can be aligned with those in the lock body and allowing them to turn an revolving cam, opening the door. Euro Cylinders are available with up to six pins. Internal and external doors require different levels of security.

The choice of the correct cylinder is essential; it depends on how your door and handle are used. External doors, for instance should be equipped with cylinders that are more secure while doors inside can be secured with the standard cylinder. Additionally, certain cylinders are available with extra features that increase security even more, like anti-drill or anti-bump features.

To make sure that the euro cylinder is the right size for your door, it should be measured accurately. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, should there be one. If you are unable measure it using the lock in its position, you can take it out of it. It is important to not have a cylindrical lock that extends beyond the handle or escutcheon. This could make it susceptible to lock snapping attacks.

The majority of modern cylinders have been constructed with anti-drill and bump resistance features that are built into their design. They are designed to decrease attacks by forcing cylinders to rotate in a different direction. This helps deflect the attack and keep your doors safe.

There are cylinders constructed to resist snapping. This is a common occurrence on cylinders. A special tool is used to break the break line of the lock and then the front of the cylinder is snapped off. This is a much faster and more convenient method of gaining access than a multipoint locking system. It also leaves no evidence of the break-in which can delay insurance claims.

Spring Cassette

The spring cassette is situated within the base plate of the door handle. It offers a spring-loaded solution to bring the multipoint lock handles to their resting position after use. These handles used to have no spring, and would slide when the locking mechanism was removed. The addition of this simple element is among the most effective ways to fix this, and is an excellent way to stop your doors made of upvc from becoming stuck in either closed or open position, as these aren't always easy to manually close by hand.

These spring cassettes have been specifically made for use with multipoint locks sprung They will not work with multipoint handles that are not sprung and you will require a hole specifically cut in the backplate to allow them to fit (please see image for technical diagram). These cassettes are a solution to broken or missing cassettes in the backplate of uPVC door handles. They feature a square cut-out that can accommodate an 8mm spindle, and are available in a variety of.

These spring cassettes are a fantastic cost-effective way to fix the problem of door handles that are sliding. These spring cassettes are simple to install and will increase the lifespan of your uPVC door. Please contact our team to learn more about our wide range of uPVC accessories and spares. We are always available to offer expert advice and support you.