• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Repair a Bad Patio Door Lock

A safe patio door is essential to ensure your home's security. It can be difficult when it isn't easy to lock.

In a lot of cases, a stubborn lock is the result of an incorrect alignment or simply wear and tear. Lubricating the lock or adjusting its position could help to restore its function. If these solutions don't work you can replace both the mortise and handle.

Clean and Lubricate

Over time, dust, dirt and grime can make it difficult to open and close doors. Regular cleaning and lubrication will help to prevent your security device from becoming stiff or stuck. This will save you money on repair patio door bills and extend the longevity of your door.

The first step is to clean your lock cylinder. To do this, use spray cans of penetrating oil such as WD-40. Spray a small amount of it into the keyhole and then move the key through and out to spread the oil. Avoid using household oil or other solvents which could damage your locks. Spray a small amount on the key.

After your lock cylinder is clean and lubricated, it's time to apply. You can use a silicone spray or dry lubricant such as graphite powder. Graphite is a lubricant that lasts for a long time that doesn't attract dust unlike liquid fluids. It's an excellent choice for lubricating locks. Silicone sprays can withstand freezing temperatures and are resistant to water. However, they may require several coats to be efficient.

You can also use de-icer spray specifically made for cold weather. It will melt the frost and ice from the mechanism of your lock. A few coats of this will help your lock to unlock and then lock more easily.

How often you have to lubricate your locks will depend on the environment. A coastal location exposes your door to salty air, which can cause corrosion. Temperature variations can influence how well your lock works. The most common rule of thumb is to lubricate your locks twice per year, or more frequently if you live in a region that has extreme weather conditions. Lubricating your patio door locks will save costs on repairs, and ensure that they continue to work properly for a long time.

Reposition the Lock Cylinder

If your patio door lock isn't working correctly, it could indicate that one or more parts are damaged or misaligned. Regular inspection and timely repair of a faulty patio door lock can prevent further damage and ensure that your doors are secure. To fix a locked or non-locked patio door, tighten loose screws and adjust the lock mechanism, or replace the lock cylinder.

Begin by looking at the exterior and inside of the lock for indications of damage or misalignment. The patio door locks can expand or contract with the weather and might even shift with time. This slight movement can cause the locking mechanism to become misaligned and cause problems when closing or opening the door.

Then, look over the lock cylinder for obstructions in the keyway hole. A corroded or blocked cylinder can be difficult to open and may eventually cause damage to the pins, cams or latch springs. If the cylinder isn't easy to insert, you may be able of removing any obstructions with the help of tweezers or a picklock. If the issue persists, you may need to take the cylinder out and disassemble it to locate the source of the obstruction.

If the lock cylinder isn't secured to the body of the lock then you can loosen it by removing a flat screw inside the cylinder's faceplate. By loosening this screw, it will allow you to move the cylinder around and could help restore proper alignment.

Look for the small tab that is movable with the key. It's usually located near the end. This little clip, also known as a "release tab" is what keeps the cylinder from sliding patio doors repairs all the way into the body of the lock. A standard key can move the tab back to allow the cylinder to be released and allow it to be removed and then reinserted.

If the lock cylinder of yours is stuck, you may be able to restore proper alignment by rotating it until the latch bolt connects with the strike plate and the handle or knob can be pulled in and out. Once you have restored the proper alignment, put back together the lock and test its performance. If your patio door lock remains difficult to use, it's likely that another component such as the latch or latch spring is worn or damaged and will require replacement.

Make sure you tighten the Screws

Locks for patio doors can be damaged by regular usage, extreme temperatures dust, dirt and. If they are not properly taken care of the delicate parts could get worn out and cause your door to fail to lock properly. Fortunately, most lock issues can be fixed easily by following a few easy maintenance steps.

It is recommended to first clean the lock mechanism. Use a damp cloth to get rid of any dust or dirt that may be present, and then dry the lock thoroughly. After cleaning, a small amount of silicone-based lubricant can keep the moving parts operating smoothly and efficiently. Avoid lubricants that have oil bases because they may attract dust and other debris and cause additional problems.

If your patio door is equipped with a security foot lock ensure that the lock is aligned with the strike plate. In most cases, this will require you to adjust the screws that attach your foot lock to the frame of the glass patio door repair door. To adjust the foot lock simply loosen the screw using a Robertson screwdriver, and then gently push it up or down. After the adjustment is completed then tighten the screw.

The most frequent issue when it comes to fixing patio door handles is misalignment of the latch and strike plate. This could be due to normal wear and tear or it could be that the latch is positioned higher or lower than it should be.

Then, take out the handle that was previously used and locate the screws or bolts that are holding it in the first place. Be sure to keep track of them as you will need them when installing the new handle. Then, take off the old spindle, then slide the new one into the door on the side of the door, making sure that it is in alignment with the holes in the exterior and interior handles. Reinstall the exterior and interior handles once the spindle is been installed. Make sure they are properly aligned with the bolts or screws that hold them in place.

After you've made the necessary adjustments to your patio door, be sure to test it by locking and closing the door. If everything is in proper alignment, the door will open and close without any additional force. If you're having difficulty then you may need to adjust the strike plate or latch or the lock cylinder may be damaged and require to be replaced.

Replace the latch

If your patio door locks not working, it could be time to replace the lock. Installing a new lock is a relatively simple home improvement project that most homeowners can complete themselves. Begin by sliding patio door repair near me the patio door completely open and unscrewing the existing lock from the inside of the door. Study the existing lock to determine the type of lock that you will need.

Before installing the new latch, loosen the screws securing the strike plate (the part of the lock that's mounted on the outside edge of the door frame) and then adjust it horizontally or vertically to align it with the latch hole in the jamb in the door. After you've adjusted the latch plate you can tighten the screws, then screw it into place.

After all components are repositioned or modified, assemble and secure the patio door in accordance with the instructions given by the manufacturer. Once you're finished checking the latch. Make sure it fits correctly and that it is able to latch when the door is shut. If it does the lock will be able to latch onto the door. If it does, your patio door lock is now working just as it should and is can provide the security and privacy you've come expect from your doors.

As with other parts of your home the patio door handle repair near me doors have to be properly aligned for them to work efficiently. Over time, cold and hot weather, dirt and debris, and other elements can cause the frames, hinges, and the locking mechanism to shift. Misaligned hinges, door frames, and locking mechanisms are like trying to put a key in the wrong keyhole. It doesn't work. By following these simple steps, you will be able to fix the issue that may have been thought to be impossible to fix. You should pat yourself on your back for tackling the task and reclaiming the patio door's closed position! We're betting you'll have no issues opening or closing your patio door again. Have fun! We're here to assist should you require assistance or have questions.