• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Repairing Window

A lot of windows require repair to ensure they open and close properly. Repairing your window can save you money when the seal is damaged, which can cause your energy bills to rise or your home to feel cold.

The hinges that are stiff can be fixed with a little oil or a ratchet tool to loosen the cover of the operator. Repairing a cracked window is also possible for the DIYer.

Broken or cracked glass

If your window is cracked or broken glass, it's crucial to take care of the issue as soon as possible. The crack may get worse if it's left unattended and could cause airflow problems within your home. If you're not confident doing the repair yourself, a professional may help.

There are many ways to repair your window depending on the severity of the crack. The simplest option is to cover the crack with clear tape. This will prevent your family from getting cut by glass shards, but still allow air and sunlight to pass through the room. If you'd like to take it a step further, you can make use of epoxy. This is a labor-intensive option however it can also provide more appealing results.

The first step is to clean the area around the crack. Dip a cotton rag into a solution of water and soap, then gently clean the cracked area. After the window has dried then apply the epoxy according to the directions on the packaging. When the epoxy has hardened using a putty blade, use it to scrape off any excess and sand it to smooth the surface.

Stress cracks are the most common type of crack found in window glass in a home. They usually begin at the edge of the glass and meander through the pane. They're usually the result of temperature fluctuations in your home, and tend to get worse over time.

If one pane of a double glazed windows repair-pane window is broken then you'll need to replace the whole unit. This is because these windows are a sealed unit with two pieces of glass that function as one. This is not like regular windows that can be replaced with frames that are new.

To replace a glass pane in your double glazed repairs-pane window, you'll need to take off the glazing clips or points that secure the window. Keep all the pieces that you'll need to replace in the broken glass pane. You'll have to scrape the old putty off, and cheaper then apply the new one for other types of windows.

Stained Glass

The tiny pieces of glass used to make stained glass windows are fragile and brittle. Rough treatment, impact with hard objects, or a sudden change in temperature could cause cracks and break the glass.

Even if a piece glass is broken it can be repaired and save the expense of taking and replacing the panel. Experts in stained glass can repair the damage by employing a variety of techniques such as refoiling or releading or soldering. They can also paint or patina or add new glass.

It can be a challenge and time-consuming to replace or repair damaged stained glass. It is essential to employ a professional with experience who is knowledgeable of the various repair techniques that are available and will pick the best one for the particular project. Reversibility, strength, and visual effects of each repair method will differ, so each one should be evaluated on a case by case basis.

Re-leading is an effective method to repair cracked leaded glass. A skilled artisan will carefully bend a piece of soft ductile led, also known as came, back into shape to accommodate the crack. Once the piece is bent it can be placed in place and then cement is used to hold it in place. When the cement has dried, the crack can be polished, cleaned and sealed.

Another way to fix cracked leaded glass is by spotting the crack and then re-leading the piece of glass. This is a more labor intensive and costly process, however it can be effective. The cracked glass is first removed from the surface, cleaned, and then sanded to smooth out the surface. Then the lead knife or pincers are used to remove the old lead and clean off any oxidation or mold growth. After the lead has been removed, the sanded surface the glass is wiped down and then the new lead is formed to neatly adjoin the damaged area and then soldered in place.

A less expensive option to fix stained glass that is sagging is to add reinforcing bars to the window. These are rebar like supports that run along the inside of the lead, and connect to the frame in order to stop the glass from sliding. The bars are often hidden behind foils with decorative designs, making them unnoticeable.

Muntins or Mullions

The term "muntin" is well-known to those who are familiar with windows. These wood strips that are vertical are used to separate the panes of traditional multi-paned windows. They are often employed to create a more authentic appearance in homes built before the time of the Civil War and are sometimes required as part of city regulations for renovations or construction in historical areas. Modern replacement windows mainly make use of muntins to improve the appearance of the window, rather than to ensure durability and strength. Muntins are still vulnerable to damage and may need to be replaced if they get damaged or decayed.

A lot of window manufacturers today don't differentiate between mullions or muntins because they both serve the same purpose. The terms are often used interchangeably but if you're replacing your windows, it's essential to know the difference between them so you and your contractor are on the same page when discussing the details of your project.

A mullion is the single vertical prop that holds panes of glass together in a multi-pane design. It was necessary before the development of glass manufacturing technology because larger pieces were virtually impossible to manufacture. The frames of today's windows are made from two glass pieces that are joined together. However, older styles of windows have mullions to support the frame and are often used for aesthetic reasons.

If your mullions are showing signs of age they can be easily repaired them by applying a drop or two of silicone on both sides of the muntin. Then press it into the frame. If you are replacing a horizontal muntin you may have to use a coping saw to cut away the old one and then form the ends using a file to fit into the mortise of the new horizontal muntin. If you want to blend in, you can purchase a new muntin slightly different from the original.

Certain IGUs contain both muntins (real mullions) and muntins (replicas) that are built in the unit solely for effect. If you're experiencing issues with these elements, then it's likely time to replace the window.

Frame

If you need to polish the frame, you can use the sanding pad using a fine grit. This will remove any stains or paint that have accumulated. Use a dry rag to clean it up. Be particular about the corners around the mitered joints. Use wood glue to re-glue them in the event that they have opened up. You can also apply vinegar in these areas to dissolve the old adhesive. However, you might prefer to test the vinegar on a few corners prior to applying it to the entire area.

If the corners are loose and a problem it is possible to disassemble the whole frame to get them in and then follow the steps 3 to 8 to resolve the issue. If the separation is only slight and on one side, it might be possible to open the joint a little by wriggling.

If the corners are completely broken, you will need a small clamp, wood glue and needle-nosed pliers. If only the top and bottom corners are damaged, you can hammer finishing nails (these are thin nails with a similar size to a head) into the corner to help to hold it in place once the glue has dried. Make sure to not put the nails too close to the corner or you could weaken it. You can also reinforce the corner using carpenter's glue and the hammer, or wood putty.