• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged window handle is a easy process, and with the right tools it can be done quite quickly. It is essential to know what kind of handle you have and its spindle size before you purchase the replacement.

Older uPVC window handles have a spur that protrudes and locks over the wedge striker. They can be right or left-handed and have to be replaced with the same handle.

What type of lock and handle do I have?

There are many different types of window handles made of upvc and locks, each with their distinct advantages and functions. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism works according to the plan. Over time, and with regular use, the upvc handles on your windows can become damaged and worn out. This makes them less secure and effective. In some cases they may even fall off completely. It is essential to fix the handles on your window made of upvc immediately if you see them falling off. This will prevent possible break-ins and will keep your home secure.

It's a task that virtually anyone can perform. With a few basic tools and the right knowledge, this is a simple procedure that should take no more than a couple minutes. To get started, you will need to identify the type of handle and lock you have on your window, which will help you identify the best replacement.

Inline Espagnolette Handles

They are typically found on the outside of the window. They have a flat design and feature an opening that is connected to the locking mechanism of the window frame when it is turned. Inline upvc handles also come with a spindle that runs through the centre of the handle, and into the window frame to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are held to the frame of the window by a single screw and are less secure than other kinds of window handles.

Handles that turn and tilt

Unlike the other upvc handles that are tilt and turn, these handles can both be rotated to open the windows and turned inwards to allow to let air flow in. They feature a 7mm spindle at the back and are available both in left and right-handed versions.

When purchasing replacement handles for windows handles made of upvc, it is important to verify the length of the spindle since not all of them are identical in size. Drop something into the middle of the hole to measure the length. This is the largest spindle size that will fit in your windows.

What is the spindle?

uPVC window handles function in a similar way as doors. By turning the handle, you will be able to operate a latch within the frame. The window is then opened and closed. However, in some cases, handles can be damaged, especially when they are frequently used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they are not functioning correctly.

There are several different types of uPVC handles that are available, including Espag, Cockspur and Spaded handle options. They are designed in a variety ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. This is why it is essential to know what type of handle you have on your uPVC window to find the right replacement.

The base section of the handle will tell the type of uPVC it is. There should be a'snap in cover' over one screw which holds the handle base in place. After removing this and you'll be able to see the second screw that holds the handle base in position. Once both screws have been removed then you should be able to pull the handle from the uPVC.

After you have removed the uPVC window glass replacements handle, you have to carefully remove the spindle you have removed from the locking mechanism. Take careful note of the length of the spindle since you will need to ensure that you buy a replacement that has the same length as your original handle and locking mechanism.

The most common issue with uPVC window handle problems is that the spindle becomes worn out and can no longer work with the locking mechanism. This can be due to damage caused by constant use or loosening of the locking mechanism or even rust over time. If this occurs, it is required to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.

How do I remove the old handle?

Window handles can be damaged or destroyed over time. It is essential to fix them as soon as possible to ensure your safety. It is good to know that replacing a damaged or worn handle is a simple job that can be carried out in less than an hour and doesn't require any specialist tools.

The first step to remove the old handle is to remove the screw that is located at the top of the base of the handle. Once the screw is removed, the handle can be pulled away. There is a second screw that is located at the bottom of the handle base, and this can be removed too. Once these two screws are removed, the handle will be detached from the base of the window.

After the handle has been removed, grab the new handle and align the fixing holes with the holes that are present in the window frame. If there is a sticker or cap on the new handle, remove it if required and screw the handle in place. Once the handle is in place, it is essential to check that it works by turning the handle and making sure that the lock mechanism is activated.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the frame's outer or the transom bar cross member within the window.

Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Once the handle is firmly fixated then replace the snap-in cover and the screw cap (if applicable). Now that the handle is in use, simply open and close the window a couple of times to make sure that it functions correctly and securely.

How do I put in the new handle?

It's not difficult to alter the handle on your Upvc windows. The procedure is simple. You'll need a screwdriver and a little bit of patience. First, make sure the old handle is unlocked. Then, remove any visible screws. You could also replace them with screw caps. Once the handle is removed it is necessary to take an note of the length of the spindle that protrudes from the back of the handle. This is crucial since it will determine the kind of handle you'll require to purchase.

Espagnolette handles are the most common type of handle for uPVC windows. The spindle is inserted into the handle to activate the locking mechanism inside the frame of the window. Once the handle is turned it opens the latch on the window and allows it to open. When used regularly and over time, handles glass for windows replacement espagnolette may be damaged.

Cadenza handles are a form of uPVC handle that is commonly used in tilt and turn windows. They have a protruding blade that operates an interlocking mechanism that is multipoint within the window. They are more secure than the espagnolette handles since they only open from the inside. They can be replaced by the same procedure as espagnolette handles but you will need to ensure that the new handle has an angled blade, as opposed to flat ones.

Once you have determined the right handle to purchase You can simply align the new handle to the existing screw holes, and then screw it into the appropriate position. Then, put the screws on and test your new handle. This is done by shifting the handle from the locked position to the unlocked and vice versa a few times. It is possible to contact an expert to determine whether you can solve any problems. They can advise you on how to resolve the problem in a timely and effective manner.