• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's how to get my keys out of my locked car to Open Your Car Without Damage

Don't panic if you've locked your keys in your vehicle. You can try a variety of ways before calling for locksmith or roadside assistance.

You can, for example make use of a shoelace with an elastic slip knot to lift the post lock. Or you can untwist a wire coathanger and form it into a hook. You can also use a door wedge or an inflatable wedge.

Pump Wedge

Get help from a professional if are stuck in your car and DIY solutions like shoestrings, wedges or wire hooks don't work. A locksmith or repo service provider may have specialized lockout equipment that will allow you to unlock your car without damaging it.

Use them correctly if they are available. The most important thing is to know where to place the wedge tool. Many people mistakenly put the wedge in the upper corner of the door, which is where it is most prone to damage. This is not a good idea because you're likely to harm the weather stripping as well as the wires inside the door. Instead, place the wedge in the largest portion of the gap that you can see and where it will have maximum leverage.

The Pump Wedge is a high-quality inflatable wedge that is made of heavy duty non-marring vinyl. It is placed between the door of your vehicle lock out service (use allpackkorea.com) and the door frame, and then is inflated to create a gap. This will let you to slide in other tools such as an extended-reach car opening rod. It has a hook on one end that you could form to grasp the latch on the door handle.

A less costly alternative is a pair made of wooden door stops. They can be placed on the rear of the door to pry the gap wide enough for a rod. You can also try using an jim that is slim which is a thin metal strip that can be bent into a hook, which can then be snared on the lock and pull it up. This method requires practice however, as you must be careful not to tear the door's weather stripping.

A shoelace is another good alternative, but it's only on older vehicles that don't have a push button for unlocking. You can tie a knot in the middle and move the lace upwards and downwards along the door seam until you find the latch. After that, maneuver the lace until it hooks the lock, tighten the slip knot and pull upward. This is a more difficult method and can scratch the paint on the door or dent the trim if you are not careful.

Inflatable Wedge

If you have a wedge-shaped inflatable car door opener, you'll be able to easily unlock your car without the need for prying or slim jim tools. These wedges for car doors can be placed between the window and the frame of the vehicle, and when inflated, they create a space that is large enough to insert an extended-reach tool like slim jims or a button grabber. This method is less risky than using prying tools and is suitable when you don't have a screwdriver.

Another good option for unlocking a car without damaging the exterior or interior is to utilize a coat hanger that has been bent into a hook shape. This can be used to grasp the lock and might be more effective than a flat screwdriver since it is less likely to cause damage to the paint of the car. However, you should look at the other doors to ensure there's no other means to gain access to the door.

You can also try using a plastic bag that has been bent into a noose-like or v-shaped shape, but you will have to be careful not to tear it, because this could make your situation even more complicated. This trick can be especially effective if you are struggling to locate the button to lock it. This method isn't as efficient as a wedge, or a coat hanger but it can assist you in an emergency.

Keep at peace and always put safety first. There are several options to deal with this issue. If you have read this article, you'll be prepared for any scenario that might arise. You can unlock your vehicle by following our steps. This will help prevent unnecessary stress and damage. If you're able, take your keys along when you leave your vehicle.

Shoelace

It's one of the "oh crap!" moments that can make a day miserable. It's best to have a few things that you can use to unlock your car without breaking any windows. Certain of these items can be easily found and will save you money on a locksmith or the time it takes for roadside assistance.

A shoelace, or even twine, can be an excellent tool for unlocking the car. It is easy to use and works on many different cars. The key to this method is a car equipped with post locks. They can be placed vertically on the window sill and easily accessible from outside the car. To complete the task, use a shoelace to make a slip knot and wiggle it into the crack between the window frame and the door. Once the slip knot has been placed, pull the ends of the string upwards to lasso it.

This technique may only work on older models that have a hooked lock. A screwdriver, should it be available could help open the door in a more aggressive manner. Another option is to snag the pole from a nearby object like a doorframe, or a piece of wood, and then stick it into the window frame to make an opening for the rod you'll use to push the interior lock button.

Although the above methods may be relatively safe for many drivers, it is advisable to get my keys out of my car help if you can. This will prevent any additional damage to the vehicle and will also decrease the likelihood of an accident caused by the stress of the situation. If you do not have a cell phone or are unable to call for help, it is important to always let trusted family members and acquaintances know where the vehicle lockout service is parked. A spare set of keys should be kept in a safe place on your vehicle.

Wire Hanger

It's a gruelling situation to lock your keys inside your car. The key is to stay calm and consider all your options logically. This will prevent you from creating a worse situation, which is something that could happen when you panic.

One of the best things you can do is use a modified wire coat hanger to get back into your vehicle. You'll have to unravel the coat hanger wire to get keys out of locked car a straight end with a hook that you can use to control your lock rod. When you are able to reach the lock rod, you should be able to pull it up to open the door.

Another option you could try is using a rod, or even an element of metal from the body of your car. It is important that you make sure you do not cause any damage to your vehicle during this process and it is ideal if you can do so without removing the car apart. This method will work better on older cars than on newer models. However, it can be used on models that have unique door handles.

You can also use a shoestring and an slip knot to accomplish similar tricks. This can be done on a postlock, however it will be more difficult to maneuver as you'll rely on the tension of the string to hold it. You can accomplish this by threading a shoestring into the tiny hole in the weatherstripping of the doors of your vehicle. Once the string has been threaded you can pull it tight to form a loop that will snap around the lock, allowing you to take it off. If you are lucky you will find the lock placed in the correct spot.