• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's how to open locked car door without key to Open Your Car Without Damage

If you've locked your keys inside your car, don't panic. There are a variety of tricks you can try before calling a locksmith or a roadside assistance service.

You can, for example using a shoelace that has an elastic slip knot to lift a post lock. Or you can untwist a coathanger wire and shape it into a hook. You can also use an inflatable wedge or door wedge.

Pump Wedge

Call a professional if you are stuck in your car and DIY methods like shoestrings, wire hooks or wedges don't work. A locksmith or repo service provider might have specialized tools for unlocking that will allow you to open your car without causing any damage.

Make use of them properly if they are available. The most important thing is to know where to insert the wedge tool. Many people place the wedge tool in the upper corner of the door which is the most vulnerable. This is a mistake because you're likely to damage the weather stripping as well as the wires inside the door. Put the wedge where you can see the biggest gap and where the highest leverage is.

The Pump Wedge is an inflatable wedge made of durable vinyl that will not scratch the surface. It is able to slide between the door of your vehicle and the door frame, and is pumped up to create a space which allows you to slide in other tools, such as a long-reach tool rod for opening the car. It also has a hook at one end, which you can shape to grab the latch inside the door handle.

A more economical version of this is to use a pair of wooden door stops. You can use them to break the gap between the back of the door. You can also use a slim Jim which is a thin metal strip which is bent into a hook, and then used to attach the lock. This method is not for the faint-hearted as you must be careful not damage the weather stripping that is on your door.

Another alternative is to use a shoelace, however, this is only applicable to older vehicles that do not have a push-button unlocking mechanism. You can tie a slip knot through the middle of the lace and then move it upwards and downwards through the door's seam until it reaches the latch. Then move the lace upwards and down until it catches on the lock. The slip knot should be tightened and pull it upwards. This method is more difficult than other ones and can scratch paint or damage the door trim if you aren't cautious.

Inflatable Wedge

You can easily unlock your car with an inflatable wedge-shaped door opener. This will spare you from having to use prying tools or slim jims. These wedges can be placed between the window and frame of the car and when inflated, create a large opening to insert a tool with a lengthy reach, like a button grabber or slim jim. This method is less risky than using prying tools and is suitable when you don't have an screwdriver.

A coat hanger that is wired into a hook is another method to unlock car door without key the car without damaging its interior or exterior. It can be used to grasp the lock The key in the car (it.euroweb.ro) and could work better than the flat screwdriver since it is less likely to cause damage to the paint on the car. You should still look at the other doors to make sure there's no other means to gain access to the door.

You can also use a plastic bag twisted into a noose or v-shaped shape. Be careful not to tear the bag since it can make the situation worse. This method is particularly useful if you can't find the lock button. It may not be as reliable as using a wedge or a metal coat hanger however, it can be useful when you're in an uneasy situation.

Keep calm and put safety first. There are many solutions to this kind of problem, and if you read this article, you'll be ready for any scenario that comes your way. You can unlock your vehicle by following our instructions. This will avoid unnecessary stress and damage. If you are able, bring your keys along when you leave your vehicle lock out service.

Shoelace

It's one of the "oh crap!" moments that can cause a lot of trouble. It's a good idea to have a few tools that you can use to open your car without breaking any windows. These items are readily available and will save you money on a locksmith or the time required for roadside assistance.

A shoelace or twine could be used to unlock a car. It is simple to use and can be used on various vehicles. The key to this method is a car equipped with post locks. They are stacked vertically on the window sill and are easily accessible from the outside of the car. To complete the task, use a shoelace to make a slip knot and squeeze it into the gap between the frame of the window and the door. Once the slip knot is put in place, pull the two ends of the string up to pull it tighter.

This method is more efficient when applied to older vehicles and may not work on modern models with a hooked interior lock. If you have a screwdriver handy, it can be used to open the door more aggressively. You can also use a rod that you can pull from a nearby item, such as the door frame, or an object of wood to stick into the window frame. This will create space for rods to push the locking button.

Although the above methods may be relatively safe for many drivers, it is best to seek assistance if you are able to. This will stop any further damage to your vehicle, and will also decrease the chance of an accident resulting from the stress of the situation. If you don't own a mobile phone or aren't able to call for help Be aware that it is crucial to let trusted friends and family members know where your car is parked at all times. A spare set of keys must be kept in a safe place on your vehicle.

Wire Hanger

There is no doubt that locking your keys in the car can be a traumatic experience. But, the most important thing is to stay calm and think through what options you have to get them back. You will avoid making the situation more difficult if you don't get caught up in panic.

One of the best options is to make use of a modified wire coat hanger to get back in your vehicle. You'll need to uncoil the coat hanger so that it has a straight slant and a hook, which you can use to move the lock rod within your door. When you are able to reach the rod, you will be able to pull it up to open the door.

Another option to explore is using a rod or even a piece of metal from your car's body. It is important to ensure that you don't damage the vehicle lock out while doing this. It is best to avoid having to disassemble the car. This method works better for older cars than newer models. However, it can be used on cars that have unique door handles.

You can make use of a shoestring and a slip knot to accomplish a similar trick. This can also be done for a post lock but it will be slightly more difficult to operate since you will depend on the tension of the string to grab the lock. The best way to do this is by threading the shoestring through a small hole that you can create within the weatherstripping of the door of your vehicle. Once the string has been threaded, you can pull it in a tight manner to form a loop that will wrap around the lock and allow you to pull it out. If you are lucky, the lock will be at the right spot.