• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

This configuration works like a periscope -- the real image bounces off the lower mirror on to the translucent glass, which serves as a projection screen. In this sort of camera, the mirror and the translucent screen are set up so they present the real image exactly as it will appear on the film. The prism's job is to flip the image on the screen, so it appears right side up again, and redirect it on to the viewfinder window.

As you can see, there's a lot involved in getting the exposure right -- you have to balance film speed, aperture size and shutter speed to fit the light level in your shot. After a certain amount of time, the second curtain slides in from the other side, to stop the exposure. To increase or decrease the amount of light passing through the lens, you have to change the size of the aperture -- the lens opening. After a certain amount of time, the second shutter slides closed, Binance order Book ending the exposure.

The ideal exposure depends on the size of the light-sensitive grains in the film. So how do you adjust this exposure level? Light passed through the hole, forming an upside-down real image on the opposite wall.

The beams travel in a straight line, d geller and sons locations so light beams from the bottom of the scene hit the top of the piece of film, and vice-versa. If you moved the flashlight, the light dot would also move -- light beams from the flashlight move through the hole in a straight line.

If the box is otherwise "light-tight," the light coming through the pinhole will form a real image on the film. Now, let's see how an SLR camera body directs the real image to the viewfinder before you take the shot, and then directs it to the film when you press the shutter button. The camera has a slanted mirror positioned between the shutter and the lens, with a piece of translucent glass and a prism positioned above it.

You don't see the real image formed by the camera lens, but you get a rough idea of what is in view.

In this way, an upside down image of the scene forms on the opposite side of the box. That way, their private information isn’t compromised. The central microprocessor receives information from the autofocus system and the light meter. The main component of the light meter is a panel of semi-conductor light sensors that are sensitive to light energy.

These sensors express this light energy as electrical energy, which the light meter system interprets based on the film and shutter speed. You can tighten or loosen some of the springs by turning the shutter speed knob. Mixing and matching fun fabrics and turning them into products that are useful is not only enjoyable but also productive, b and r finance moore ok reviews and complaints which is always a good thing when time is at a premium. This works especially well for beds that are tucked into an alcove, though you can always hang a second curtain at the head or foot of the bed to serve as an extra wall and close off the fort.