• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

repairing upvc windows is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass window repair in your windows could cause serious damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need to open the window so that you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're happy with the fit, tighten the screws until they remain in position.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. Most often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the emergency window repair and then perform an initial fitting. The corners of the sash must align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking may have to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze, it may be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It's easy to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

It is also important to verify that the upvc windows repairs hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. First, the hinges because of wear and tear, could become misaligned. This will cause an opening to appear between the sash and the frame. They can be repaired by giving them a thorough clean, however when they're beyond repair, it could be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

Another, and most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. These will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. If you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.