• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This can be caused by a variety of problems, such as dirty tracks or misaligned sliders.

Start by cleaning the track and making sure that the rollers are lubricated. You can also re-align the rollers using the adjustment holes that are located on the bottom side of the door panel that can be moved.

Dirty or Damaged Track

A dirty or damaged track can cause the door to not slide smoothly. Over time, dirt, grit, and even rust could build up, preventing the track to move smoothly. A gentle detergent and a brush will suffice. It is recommended to complete this task on a regular basis to ensure the smooth operation of your door, and to avoid the need for costly repairs down the road.

A leaky door can be a frequent issue. It requires immediate attention to stop water damage, structural deterioration and the growth of mold. The most common cause is damaged weather stripping or misaligned doors, which can be corrected by replacing old weather strips and by aligning the door.

Another issue that is common and can be solved with a bit of DIY work is when rollers jump off their track. Recruit a friend to help you with this job because the door may be heavy. Sit inside the house and lean a panel toward you to move the rollers. When the panel is lifted off the bottom track, you'll need to set it on sawhorses to keep it from falling off. Then, loosen the screws that keep each roller in place and remove them with the help of a screwdriver. Now, you can get rid of any dirt that is stuck between the tracks and the wheel. Clean each wheel with denatured alcohol on a rug. Reposition the wheels back to their tracks and then attach them again.

It may be possible to straighten bent sections of track using a mallet made of rubber and a piece of wood. However in the event that the bent portion is near the hinges and has the potential to cause further damage, you'll better off calling an expert for safety reasons.

Misaligned Rollers

If your sliding patio doors repairs door is experiencing a problem sliding, it is likely that the rollers are not aligned correctly. The wheels may be dirty or rusted and their bearings wear down. This friction causes the door to snag and grind when it's opened or closed. This can also trigger squeaking sounds.

Fortunately, this is an easy fix. It is not necessary to take off the door to get at the wheels since they are mounted on a bracket which is adjustable. Locate the adjustment holes (usually on either side of the frame) and use a screwdriver to rotate the screws that control the wheels. Turning the screw clockwise will raise the wheel, whereas turning it counterclockwise lowers it. Continue to adjust the door until it is open and shuts smoothly.

It is essential to adjust the wheels prior to making adjustments to the latch. The latch hooks must be aligned with the strike plate (the opening through which the latch locks) in order for the lock to work properly. If you don't do this, the latch could open or close when you're not in the room.

The sliding patio doors are an investment. Maintaining them in good working order will keep your family safe. By fixing common issues such as damaged tracks, rollers or handles, you can prevent expensive repairs in the future. Contact us to learn more about patio doors. We can assess your needs for repair of your sliding patio door and assist you in keeping it in good condition. Our professionals are also able to assist with any replacement parts you may need.

The door frame is sagging or damaged

Doors for sliding patios are an excellent option for any home. They are a practical and attractive alternative to hinged or swing-open doors for patios. Like other hardware items, sliding patio door repairs patio doors can be prone to problems in time. Fortunately, many of these issues are simple to repair with a little DIY knowledge.

A gap in the frame is a typical problem with sliding patio doors. This could be due to a number of factors, including rollers or tracks that are not aligned properly or a damaged track door, or a bent door frame. In most instances, the issue can be easily fixed by removing the doors and reattaching the track. This should be done with extreme care so as not to harm the track or frame.

In certain instances it might be necessary to replace the entire track. This can be easily accomplished using a universal replacement kit that is available at all major hardware stores. These kits are simple to install and will have your door working perfectly in no time.

It is important to inspect your sliding door's frame and hardware for signs of wear and tear, for instance loose screws or bolts. These can often be tightened with a screwdriver, or wrench and is a simple and effective DIY patio door maintenance process. Additionally, it is important to lubricate your rollers and tracks to facilitate smooth operation and to prevent premature wear.

For many homeowners who live in the city, their patio doors are the primary entry point to their backyard as well as outdoor living space. In order to maintain comfort and security in the home, it's important that they function properly. By following these simple DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio door and cut down on costly repairs or replacements.

Handle is not working properly

Sliding patio doors provide an ideal way to enter your backyard and enter your home, however they can be difficult to operate if misaligned or damaged. A faulty handle can also cause the door to become stuck or difficult to open and close. The good news is that fixing loose handles is a simple task that can be completed at home.

In many instances, a loose handle is simply the result of screws that have worked through the backplate. To fix the problem tighten the screws that are on the inside of the handle using the help of a screwdriver. If the handle remains loose it could indicate that the threads are worn out and require replacement.

A damaged latch could be the reason. It is more likely that the latch will break if made of metal, instead of plastic. Try applying lubrication to the latch in case it isn't catching, or turning. If this doesn't work, you may have to replace the lock.

If the handle is cracked or broken, it could be difficult to use. If this happens it is necessary to replace it with a brand new handle that is in line with the design of your sliding patio door.

Whether your patio doors are old and outdated or new, Feldco can help you get them back on track. We offer a broad selection of high-quality double glazed patio door repairs doors that come in a variety of sizes and styles. To find out more about our products, call us now! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Weatherstripping that isn't working properly

It's time to replace your weather stripping if you notice light coming from doors and windows or notice a draft pushing towards the door or window. These strips create a secure seal that keeps unwanted air, pests, and water from getting inside your home. This helps keep your conditioned and heated air inside, saving you money on energy costs.

Depending on the condition of your weather stripping, it may have deflated, and lost its bouncy, positive seal. It is easy to determine this by taking a dollar note and running it under the seal along the top of the door frame as well as the bottom of the door jamb where the two overlap. If the dollar bill slides easily between the seal and the door is the time to replace the weather stripping.

If you only replace the worn-out part of the weather stripping, this may cause problems in the future with the seal. It's much more effective to replace the entire stripping so that you can be confident that your door is sealed again.

Follow our DIY guide for weather stripping to install the correct material on your sliding patio door and frame, to ensure a tight and long-lasting seal. It's a great method to repair your door and cut your energy bill and you shouldn't wait until it's too late. Your wallet and home will be thankful.