• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an auto locksmith or Subaru dealer, depending on the age of your Subaru is. This is done by connecting a computer programming machine to your vehicle.

To program your Subaru unlock the door to the driver's side using the door button and close it. You will hear the chime, and see the dome lights flash in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are several ways to program your key fob. First, you must be aware of what kind of key fob you own. This can be done by looking at the design of the key fob, or by listening to the buzz in your car.

Once you have the necessary information, you can start the process of programming your key fob from home. You'll require a flathead and a metal key for this. Open the key fob by twisting. Then, push the metal key in and pull the battery from the small tabs that secure it. Replace the battery and put the case back together.

Step 2: Remove the key fob case

It is a good idea to replace the batteries in key fobs in case they're not functioning. In some instances, the buttons on the key fob might be damaged. If you notice that the contacts made of metal on the button have become loose Try soldering them into place again to make them work again.

Before you start the process, ensure your vehicle's doors are closed and the ignition is off. You can do this by closing the driver's door, and then pressing the door button ten times in quick sequence. Then, you should hear the instrument panel chime and the dome light will flash. This indicates that you're in a position to proceed.

Step 3: Insert the Key Fob in the ignition

Many websites will tell you how much does it cost to replace a subaru key to program your brand new or Replacement Subaru key, fakenews.Win, Subaru keyfob at home. However, many of them do not give very specific instructions. A professional locksmith or auto dealer in Fort Bliss is the best solution for reprogramming your electronic car key.

Sit in the driver's seat of your lost subaru car keys with the engine turned off and all doors shut. Use the door button to unlock all doors. Open and close the driver’s door a second time. Then, insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp to confirm that the settings have been changed.

Step 4: Turn the ignition On.

Before proceeding with this method of key fob programming, it is important to keep in mind that this method only works when you have a working key already. If you don't, then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

Once the key is programmed, it should be capable of starting your vehicle within about five seconds. To begin, ensure that all doors are closed and the engine is off. Sit in the driver's seat and unlock all doors using the door button. Insert the key into the ignition then turn it on to the first position (the electrical systems will come on, but the engine is off) then turn it back to the off position ten times in quick succession.

Step 5: Unlock the Driver's Door

Subaru has a broad selection of high-end cars with key fobs that lock and unlock doors as well as start the car and defrost the windows. However, at times, these devices do not function properly.

To resolve this issue to fix it, you must contact an auto locksmith or dealer. This will fix the issue and ensure your vehicle is secure.

It is necessary to first open and close the driver's side door. Place the key into the ignition, and then turn it to position 1. Then, return it to the off position. Repeat this 10 times in an order as fast as possible. After the tenth time, you will hear a sound.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

The procedure to replace the battery inside the subaru smart key replacement remote key fob is a breeze. First, open the external fob casing. Use a flathead to pry the case's interior open and take out the old batteries.

After removing the battery to replace it, you can replace it with the new one. Close the case. Relax in the driver's seat and then unlock all doors by using the door button control. Place the key in ignition and turn the key so that the electric system is turned on, but the engine is off. Repeat this 10 times until you hear a chime from the instrument panel. This will bring the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoyance sound heard when locking or unlocking the Subaru key fob from outside can become distracting. In certain situations you can turn off the sound by shutting and opening all doors while double-clicking lock button on the key fob.

Close all doors, including the fuel-filler lid and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After that the instrument panel will emit an audible chime. The chirp indicates that the fuel-filler lid and door lid are locked. The setting can also be altered to ensure that the doors and lids of the fuel-filler lock automatically without pressing the request switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number.

Note down the initial series of 8-digits, and keep it in your wallet. Then, sit in the driver's seat, close the doors and turn the ignition to the first position. After ten turns, your instrument panel should chime once.

Then, you need to open the key fob case and find the circuit board of the transmitter inside. The circuit board should contain one or two numbers with 8 digits. Follow the steps in the guide to register the code. This could mean visiting the dealer for older models.