• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your prized possession from theft. This system is discrete and does not require any additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence up to 20 presses. This will then authorize the vehicle to start.

Simple PIN code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a myriad of security products that are available including tracking systems, immobilisers and alarms. However, not all of these are equally effective in protecting your car. A tracking device can help you locate your vehicle in the event of it being stolen however it cannot prevent the crime. Immobilisers, on the other hand, does exactly what it says on the label: it shuts off the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your car.

The ghost device makes use of the buttons on your car to generate a unique sequence that must be entered to allow the engine to begin. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This option is particularly useful if you need to hand your car over for valet parking or maintenance since the immobiliser will remain activated, but not disabled.

The Ghost is a very unique and ingenious device that works in conjunction with the buttons of your car instead of being a separate unit. It's not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you own. This makes it a far more cost-effective option than a traditional wheel lock.

Small device that is weatherproof

The autowatch ghost installers ghost ii immobiliser Immobiliser is a high-tech security device that shields your vehicle from key cloning and hacking. It also prevents ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant to jamming devices, which is an approach used frequently by thieves to get around existing immobilisers.

The benefit of using CAN data is that it operates silently compared to traditional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons in your vehicle, like the steering wheel, centre console or doors, to create unique sequences for disarming. The sequence can be extended to 20 presses to provide additional security. The iPhone app allows a single, authorised connection with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The ghost immobiliser 2 also stops thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start if the correct PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) to allow you to hand your car over to a valet service or to be serviced without needing to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device is able to intercept signals and prevent your car from starting up normally until you enter a customized code. The system can be turned off or on via your smartphone's app without the need for additional wires.

The factory-installed immobilisers function by using a transponder that is built into the key. This sends a message to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser won't recognise it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It safeguards your vehicle from hacking, key cloning and even key theft. Only by physically towing your car away from thieves could they take it away, and they would still not be able to drive the vehicle.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique PIN sequence that can be changed that needs to be entered before you can drive. This is not required to use additional hardware like keys-fobs, and can last up to 20 presses long. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code-grabbing technologies to identify that a system has been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming using a series of buttons. This makes it a perfect complement to a GPS tracker which helps locate your car after it has been stolen.

Emergency PIN code override

You don't have to look very long on social media sites to find stories or videos about cars that were stolen using the most advanced technology tools. This includes key-cloning devices and hacking tools that allow them to start the car without your original keys.

Our range rover evoque ghost installer immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It is created by creating a unique pin code sequence that is triggered by your buttons on the steering wheel, door panel, and the center console. The unique pin code is entered alongside the original key fob to stop the engine from beginning. The unique override pin can be located on a black card that you will receive after your installation. It is simple to remember since there aren't any LED indicators.

The device is hidden in the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can determine what type of security systems you have installed. This makes it a fantastic alternative to a tracker.

Unlike most other security systems that have an engine relay bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending the use of a digital block of commands to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems but this must be stated prior to the installation of the device. They also work with valet/service modes and is a great alternative to a tracking device when you take your car into the dealer for an electrical problem.

Service/Valet mode

In recent times there has been an rise in the number of vehicles that are stolen without owners' keys. It's easier than ever before to steal your pride & joy due to the availability of key cloning tools & door lock picks. To combat this we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys were cloned or your car has been hijacked.

It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It is completely silent, because it does not utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding a new key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is concealed inside your car using existing buttons on the steering wheel, centre console and door panels. A unique & changeable PIN code sequence up to 20 digits has to be entered before you can start your car.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being moved away or even started in the event that a PIN code hasn't been entered first. If you are driving away with the device arming it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car stolen with ghost tracker installation immobiliser, https://Mikkelsen-goldman.thoughtlanes.net/, will continue to function just as normal. If you do not enter your PIN code at this point, the warning will continue to flash and will require a new PIN code every attempt to start your vehicle.