• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It's discreet and doesn't require additional key fobs in order to operate.

The device uses existing buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence up to 20 presses long. This allows your vehicle to begin.

Simple PIN code change process

With the rising rate of vehicle thefts, many owners are looking to improve their security. There are a variety of aftermarket security devices available including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking device can assist in finding your vehicle in the case of theft, it can not stop the crime from occurring in the first in the first place. An immobiliser, on other hand is exactly what says on the label: it shuts off your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered before the engine will start. This can be done using the indicator stalk windows or heater buttons. In addition to this option, there is an app on mobile that acts as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great option if you want to give your car to valet parking or maintenance. The immobiliser will stay in operation.

The Ghost is an innovative and unique device that works with your vehicle's buttons rather than as a standalone device. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used to secure any future vehicles you may own. This makes it a much better investment than a conventional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is an advanced security system that protects your pride and joy against key cloning, hacking & ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for additional wiring, and has been thoroughly tested to ensure it works with all vehicles. It is also immune to jamming devices that are a popular method used by car thieves to bypass immobilisers.

The advantage of using CAN data is that it operates in a silent manner when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The autowatch ghost installer bmw x6 ghost installer doesn't use LED indicators but instead utilizes buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a a unique disarming sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to run only if the correct pin code is entered. It can be temporarily operated in Valet/Service mode (with parameters set such as 30mph speed limit) which means you can give your car to an attendant or valet without having to enter the code.

Each vehicle is tested

The Autowatch ghost immobilise (https://te.legra.Ph/) is the first aftermarket immobiliser on the CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from running its normal start-up routine until you input an individual passcode. The system can be turned on and off through your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. It transmits a message to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser won't recognise it. This allows the vehicle be started and stolen. The Ghost immobiliser was created by a South African company at the top of the line in vehicle security technology. It shields your pride and joy from hacking, key cloning and even key theft. Only by physically towing your vehicle away could a thief steal it, and they would still not be able to drive the vehicle.

ghost 2 immobiliser installation near me makes use of buttons in your vehicle, including the indicator stalk, steering wheel, as well as the door panels, to generate a unique PIN code which must be entered in order to use your car. It does this without additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is concealed within the vehicle to ensure that it can't be taken away or disabled by thieves. It is even more difficult to get rid of than a car alarm that requires disarming using the use of a button sequence. This makes it a fantastic alternative to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't need to go far on social media to find stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle with your original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It is created by creating an unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel and centre console. This unique PIN is entered in conjunction with your original key fob to prevent the engine from starting. The unique override pin can be found on a black plastic card that you receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, so it isn't able to be detected by modern criminals using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to other security systems which rely on a relay in the engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with the use of a digital block of commands for both the ECU and the engine.

These systems can also be connected to a separate alarm, immobiliser or tracker. This should be decided prior to the installation. They are also compatible with service/valet modes and a great alternative to a tracker device when you take your car to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent times, there has been a rise in the number of vehicles that are stolen without owners' keys. It's now easier than ever to take your joy and pride due to the availability of key cloning tools & door lock picks. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your vehicle has been stolen.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also prevents the user from using an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is concealed inside your car, using buttons on the steering wheel, the centre console and door panels. Before you can begin your car, you need to enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket CAN bus immobiliser that is being developed. It can prevent your vehicle from being driven or started in the event that you do not enter a PIN number first. If you're driving away with the device arming, an indicator will appear on your dashboard and flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function just as normal. If you do not enter your PIN code at this point, the warning will continue to flash and require another PIN code for every attempt to start your car.